nardi PV64DTC, Руководство по эксплуатации

Страница: 15 / 60

Instructions for use GB
4 - ENGLISH
Depending on the model, the following symbols for operating the
individual heating elements are located in the zone where the hob
controls are situated:
ON/OFF symbol – Turns the hob on and off
Symbol for selecting the cooking zone
Symbol for selecting the cooking zone and increasing the settings
Symbol for increasing the settings
Symbol for decreasing the settings
Double zone symbol
Make sure that the area with the controls is clean and unobstructed before
connecting the hob to the electricity main. The displays in the control zone will
come on briefly once the hob has been connected.
How to turn on the cooking zones:
Before the cooking zones can be switched on, the hob must be powered by
touching the ON/OFF symbol. “
0
” or “
H
” will appear on the displays. The hob
will remain activated for about 20 seconds, during which the cooking zones
can be switched on. Select the zone you require by touching the relative
symbol, then touch symbol “+” or symbol “-“ within ten seconds.
When you touch symbol “
+
”, setting “
1
” will appear on the display. This can be
increased up to setting “
9
”.
When you touch symbol “
-
”, setting “
9
” will appear on the display. This can be
decreased down to setting “
1
”. Setting
0
turns off the cooking zone.
Boost function “
A
” (if available):
The Boost function raises the cooking zone to maximum power for a certain
period of time (see table), after which it automatically switches to the selected
setting. The Boost function is activated by touching the “
+
” symbol in position 9
and is indicated by the alternating number and the letter A. The setting can be
adjusted from 9 to 1 once the Boost function has been activated.
Notes:
The cooking zones can only be regulated after they have been selected. The
time ranges differ, depending on the settings (see table).
Double zone (if available):
The double zone function is powered contemporary to the respective internal
part of the cooking zone (the red dot alongside the symbol of the relative zone
will come on). Use the double zone symbol to switch off the external zone.