General Information
1-1
1 - General Information
1.1 Documentation
Enclosed with this manual are:
•
a service questionnaire to send back to NARDA in case of equipment
service is needed
•
an accessories check list to verify all accessories enclosed in the
packaging.
1.2 Introduction
PMM 6000N is a wideband RF power amplifier covering a 9 kHz
÷
230
MHz frequency range with output power level of 10 Watts into a 50 Ohm
load.
In the 150 kHz
÷
80 MHz frequency range the amplifier performs a output
power level of 15 Watts.
The amplifier employs a fully MOSFET technology and is biased for Class
A operation assuring good performance, reliability and high tolerance to
load mismatch conditions. With an overall gain of 40 dB, PMM 6000N has
been designed with frequency range and performance according to Basic
immunity Standard EN 61000-4-6 (IEC 1000-4-6). It is ideally suited for
wideband power sweeping and is compatible with most RF signal
generators capable of 1mW of signal output. A front panel-mounted RF
power meter facilitates monitoring the amplifier output signal in Watts into
50 Ohm loads.
1.3 Instrument items
PMM 6000N includes the following items:
•
10 Watts power amplifier from 9 kHz up to 230 MHz;
•
Power
cable;
•
Operating
manual;
•
BNC-BNC
cable;
•
N-BNC
adapter
1.4 Optional
accessories
The following accessories may be ordered as options:
•
PMM 3000 RF- signal generator;
•
150-to-15 Ohm adapters;
•
6 dB, 50 Ohm fixed attenuator;
•
Coupling/Decoupling
Networks;
•
EM current injection clamp
•
Selective
Voltmeter
•
Current
Probe
Document 6000NEN-90404 -
©
NARDA 2007
