manualshive.com logo in svg

NARDA NBM-550, Руководство по эксплуатации

Поделиться
Скачать
NARDA NBM-550 Скачать руководство пользователя страница 35

3.5   Connecting the probe

Narda

NBM-550

25

the data sheets of the NBM-550 and probes.

 

These 

documents can also be downloaded from the Narda web 
site on the Internet at 

http://www.narda-sts.com

.

„

Probe with “Push-Pull” connector

Connecting the probe

✓

The red mark on the probe plug 

(10)

 is pointing towards 

the front of the instrument.

Push the probe plug 

(10)

 straight down into the probe 

socket 

(1)

 until it clicks into place.

Disconnecting the probe

Slide the sleeve on the probe plug 

(10)

 upwards and pull 

the probe upwards to remove it.

Probe with threaded coupling 
connector

The latest devices use threaded connectors for the link 
between the probe and the basic unit. The basic unit is fitted 
with a longer socket which can be recognized by the 
approximately 1 cm long threaded section. Probes fitted 
with "push-pull" connectors can still be used with this 
connector. Probes with threaded coupling connectors can 
only be used with this new, longer connecting socket. 

Connecting the probe

✓

Make sure the guide lug on the probe plug 

(10)

 is 

pointing towards the front of the instrument.

Push the probe plug 

(10)

 straight down into the probe 

socket 

(1)

 and tighten the threaded coupling using your 

thumb and forefinger. Never tighten the coupling using 
pliers or other tools.

NOTICE

Wrong handling of the probe

Damage of the probe head

Always hold the probe at the metal plug end.

Содержание NBM-550





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды