NARDA nbm-520, Руководство по эксплуатации

Страница: 38 / 64

4 Measuring with the NBM-520
32
NBM-520 Narda
To remote control the NBM-520 from an NBM-550
measuring set
1. Set the NBM-550 to controller operating mode (see
NBM-550 operating manual).
2. Switch on the NBM-520 and connect it to the NBM-550
using a fiber optic cable.
ª
The NBM-520 can be used as an extended probe
handle.
ª
All the measurement functions of the NBM-550 can
be used.
Note:
The probe must be connected to the NBM-520.
Probes connected to the NBM-550 will be ig-
nored. The display of the used probe type on the
controller (NBM-550) changes from
Probe:
to
Remote:
in order to indicate an external probe
(for example,
Remote: EF0391
).
To remote control the NBM-520 using the NBM-TS
software
1. Connect the NBM-520 to the PC (see
Connecting the
NBM-520
on page 36).
2. Use the NBM-TS software to control the instrument (see
Working with the PC software
on page 36).
To set the NBM-520 from REMOTE operation back to
manual operation:
⇒
Briefly press the
ON/OFF
button.
Instrument settings during remote
control operation with NBM-TS or with
NBM-550 as the controller
NBM-520 instrument settings are not changed in either of
these remote control modes. While operating remotely, the
instrument also displays the results in the measurement
mode and the unit that were set before activating remote
control operation. This ensures that the NBM-520 always
remains correctly configured.