18
After unp
ackin
g
After unp
ackin
g
Recovery after storage and transport
The guaranteed operating temperature range
of the instrument is -10°C to +50°C.
Condensation may form on equipment that
has been stored or transported at low
temperatures when it is brought into a warmer
environment. To avoid damaging the
instrument, wait until the condensation on the
instrument has evaporated before switching
on. If stored at a higher temperature, wait until
it has cooled to within the operating range
before switching on.
Power supply
ESM “RadMan” is battery powered.
Two 1.5 V batteries, (alkaline Manganese
AAA size), operating life typically
200 hours with cover closed (J).
ESM “RadMan” is shipped without batteries
fitted.
Fitting the batteries
Make sure that the ESM “RadMan” is
switched off.
Fit the batteries
(see page 43).
Switch the ESM “RadMan” on after
changing the batteries and monitor the self
test (see page 21).
ESM-30 only:
Set the date and time to provide a
reference for recorded data. To do this,
use the ESM-TS Interface Set which is
available as an option.
Storage, Power supply
Содержание 2250 SERIES
