7
AR M I N G AW AY : S E T T I N G T H E AL AR M W H E N L E AV I N G
System Trouble
If you attempt to arm with the TROUBLE icon on, a 3-second tone will
sound and a “P” will display in the window. This indicates that the system has detected
a problem which may prevent it from operating properly. A number corresponding to the
trouble will then appear in the display. Refer to SYSTEM TROUBLE ERROR CODES
for descriptions of these troubles. If you cannot correct the problem immediately, press
y
and you will then be able to arm the system in this condition.
Note:
If you
cannot clear the trouble, have the system checked as soon as possible.
Area Arming (Optional)
In a system that has been partitioned into multiple areas, one or more areas may be armed while others remain disarmed.
Manager's Mode.
The Manager's Mode allows the user to arm / disarm other areas in a partitioned system.
To arm a different area:
1. Press the numerical key representing the other area number.
2. Press
G
followed by
u
. The keypad will now provide status and control of that area.
3. Enter your code followed by
q
to arm.
4. Press
G
followed by
u
to return to the home area.
Global Arming
(For GEM-P9600/3200 panels only).
To arm all areas simultaneously (including the area you are in), press
9
,
G
and enter your code followed by
q
.
To disarm all areas simultaneously, press
0
,
G
and enter your code followed by
u
.
•
The User Code must be valid in all area(s).
•
If any zone is not secured, the keypad will display “P”. All faulted zones in the respective area(s) must be secured or
bypassed.
Note:
If a system trouble is indicated, the system cannot be armed using this method.
CHIME
TROUBLE
P
