Napoleon Torch GSST8N and Скачать руководство пользователя страница 2

2

W415-0689 / 06.25.08

!

WARNING

 PG 2-5  INTRODUCTION

 

  

 

  Warranty

  

 

  General Instructions

   

 

  General Information / Rates and Ef

fi

 ciencies

   

 

   Care of Glass and Plated Parts

  

 

  Dimensions

5-7   

INSTALLATION

 

   

  

 

  Gas Installation

  

 

  Electrical Connection

   

 

  Clearance to Combustibles

8-11  

FINISHING

   

 

  TMCSS Mounting Cabinet Installation 

  

 

  Rain Tabs

  

 

  Door Removal

  

 

  Glass Removal

   

 

  TFSSO Frame Installation

  

 

  Logo Placement

   

 

  Accent Glass Installation

   

 

  LK8 Light Installation (Optional)

TABLE of CONTENTS

NOTE:  Changes, other than editorial, are denoted by a line in the margin.

 12  

OPERATING INSTRUCTIONS

 

 

 

 13  

MAINTENANCE

  

 

  Cleaning

 

 13  

ADJUSTMENTS

  

 

  Gas Pressure Adjustment

  

 

  Venturi Adjustment

  

 

  Flame Characteristics

14  

REPLACEMENTS

 

  

 

Replacement 

Parts

  

 

  Accessories 

15  

TROUBLE SHOOTING GUIDE

16  

SERVICE HISTORY

Improper installation, adjustment, alteration, service or maintenance can cause 
injury or property damage.  Read the installation, operating, and maintenance 
instructions thoroughly before installing or servicing this equipment.

•  Do not burn wood or other materials in this enclosure.

•  Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away   

  to avoid burns or clothing ignition. Supervise young children when they are in the same area as the enclosure.

•  Clothing or other 

fl

 ammable material should not be placed on or near the enclosure.

•  Due to high temperatures, the enclosure should be located out of traf

fi

 c.

•  Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces.

•  Even after the appliance is out, the glass and/or screen will remain hot for an extended period of time.

•  Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from hot  

 

 surfaces. 

•  Any safety screen or guard removed for servicing must be replaced prior to operating the enclosure.

•  It is imperative that the control compartments, burners and circulating blower and its passageway in the enclosure is

  kept clean.  The appliance should be inspected before use and at least annually by a quali

fi

 ed service person.  The 

  enclosure area must be kept clear and free from combustible materials, gasoline and other 

fl

 ammable  

 

 

  vapours and liquids.

•  Under no circumstances should this enclosure be modi

fi

 ed.

•  Do not use this enclosure if any part has been under water. Immediately call a quali

fi

 ed service technician to inspect  

  the enclosure and to replace any part of the control system and any gas control which has been under water.

•  Do not operate the appliance with cracked or broken glass. Replacement of the glass should be done by a licensed  

 or 

quali

fi

 ed service person.

•  Do not strike or slam shut the enclosure glass doors.

•  Provide adequate ventilation and combustion air.  Refer to unvented room heaters installation instructions.  Never    

  obstruct the front opening of the enclosure.

•  Furniture or other objects must be kept a minimum of 4 feet away from the front of the enclosure.

•  Do not use a blower insert, heat exchanger insert or other accessory not approved for use with this enclosure.

•  This appliance is only for use with the type of gas indicated on the rating plate.

•  The gas log heater must be secured to the enclosure 

fl

 oor to ensure that the position is not changed while adjusting  

 controls.

•  Only doors / optional fronts certi

fi

 ed with the unit are to be installed on the appliance.

•  This enclosure uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied  

  by Wolf Steel Ltd.

•  The burner must be replaced prior to the appliance being put into operation if it is evident the burner is damaged.     

  Replace only with a burner supplied by Wolf Steel Ltd.

!

WARNING

Содержание Torch GSST8N and

















Отзывы: