![Napoleon Rogue RSE425RSIBPK-1 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/napoleon/rogue-rse425rsibpk-1/rogue-rse425rsibpk-1_manual_706435016.webp)
16
EN
www.napoleon.com
N415-0576CE-GB-DE OCT 31.19
Problem
Possible Causes
Solution
“Paint” appears to be
peeling inside lid or hood.
Grease build-up on inside
surfaces.
This is not a defect. The finish on the
lid and hood is porcelain, and will
not peel. The peeling is caused by
hardened grease, which dries into
paint-like shards, that flake off. Regular
cleaning will prevent this. See cleaning
instructions.
Burner output on “high”
setting is too low.
(Rumbling noise and
fluttering blue flame at
burner surface.)
Lack of gas.
Supply hose is pinched.
Dirty or clogged orifice.
Spider webs or other matter in
venturi tube.
Check gas level in propane cylinder.
Reposition supply hose as necessary.
Clean burner orifice.
Clean out venturi tube.
Infrared burner (if
equipped) flashes back
(during operation the
burner abruptly makes
a loud “whoosh” sound,
followed by a continuous
blow-torch type sound
and grows dim.)
Ceramic tiles overloaded with
grease drippings and build-up.
Ports are clogged.
Burner overheated due to
inadequate ventilation (too
much grill surface covered by
griddle or pan.)
Cracked ceramic tile.
Leaking gasket surrounding the
ceramic tile, or a weld failure in
the burner housing.
Turn burner off and allow to cool for at
least two minutes. Relight burner and
burn on high for at least five minutes or
until the ceramic tiles are evenly glowing
red.
Ensure that no more than 75% of the
grill surface is covered by objects or
accessories. Turn burner off and allow
to cool for at least two minutes, then
relight.
Allow burner to cool and inspect
very closely for cracks. If any cracks
are found, contact your authorized
Napoleon dealer to order a replacement
burner assembly.
Contact your authorized Napoleon
dealer for instructions on ordering a
replacement burner assembly.