Napoleon LD325SB, Руководство пользователя

Страница: 6 / 76

6
www.napoleongrills.com
Lighting Instructions
Off Position
WARNING!
Open lid.
WARNING!
Ensure all burner controls are in the off position. Turn on the gas supply valve.
Main Tube Burner
Lighting
Side Burner Lighting
1. Open grill lid. 1. Open side burner cover.
2. Push and turn any main burner knob slowly to the
’hi’ position. This action will ignite the pilot flame
which will in turn light the selected burner. If the pilot
lights, continue to push down on the control knob until
the burner lights and then release.
2. Push and turn side burner control to high position.
3. If the pilot does not ignite, then immediately turn
the control knob back to the ‘off position and repeat
step 2 several times.
3. Press and hold igniter button until burner lights, or light
by match
4. If the pilot and burner will not ignite within 5
seconds, turn the control knob to the ‘off’ position and
wait 5 minutes for any excess gas to dissipate. Either
repeat steps 2 and 3 or light with a match.
4. If the burner will not ignite within 5 seconds, turn the
control knob to the ‘off’ position and wait 5 minutes for any
excess gas to dissipate. Either repeat steps 2 and 3 or light
with a match.
5. If lighting the unit with a match, clip the match into
the supplied lighting rod. Hold the lit match down
through the grill and sear plate while turning the
corresponding burner valve to high.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
WARNING!
Do not use the rear burner (rotisserie burner) with the main burners operating.
Left
Burner
Right
Burner
Lights
Side
Burner