Napoleon Gourmet Grills BIPT450, Инструкция по эксплуатации

Страница: 7 / 12

7
www.napoleongrills.com
BIPT600 BUILT-IN INSTRUCTIONS
This grill is designed for masonry, NON-COMBUSTIBLE enclosures only, and must be installed and serviced
by a qualified installer to local codes.
1. Attach side mounting brackets to each side of the grill using #14 x 1/2” screws (N570-0086).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be ap-
plied to each wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounting brackets. Connect
the flex supply line to the fitting at the end of the manifold.
4.The entire installation must be leak tested before operating the unit.
N080-0213
N080-0213
N570-0086
N715-0081
N570-0086
W445-0031
N010-0281
N010-0569