Napoleon GD16 - N Скачать руководство пользователя страница 1

Страница: 1 / 24

WS-415-112 / 06.18.99

GAS - DIRECT VENT MILLIVOL

GAS - DIRECT VENT MILLIVOLT SYSTEM

T SYSTEM

INST

INSTALLA

ALLA

ALLATION AND OPERA

TION AND OPERA

TION AND OPERATION INSTRUCTIONS FOR

TION INSTRUCTIONS FOR

VENTED GAS FIREPLACE

NATURAL GAS MODEL

GD16 - N

PROPANE GAS MODEL

GD16 - P

CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / AGA / CGA METHODS

INST

INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER

ALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER

CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CSA 2.22, AND ANSI Z21.50 RESPECTIVELY FOR VENTED GAS FIREPLACES.

Fax:

(705)722-6031

Email:

[email protected]

Web:

www.napoleon.on.ca

Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,

Barrie, ON., Canada L4M 4Y8 (705)721-1212

R-2000

WARNING:

ARNING:

ARNING: If the information in these instructions is not followed exactly, a fire or

explosion may result causing property damage, personal injury or death.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of

this or any other appliance.

WHA

WHAT

T T

TO DO IF YOU SMELL

O DO IF YOU SMELL

O DO IF YOU SMELL GAS:

GAS:

• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.

• Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.

Installation and service must be performed by a qualified installer, service

agency or the gas supplier.

Содержание GD16 - N

























Результаты поиска

Содержание GD16 - N

Отзывы:

Бренды по названию

Популярные бренды

Napoleon GD16 - N, Инструкция по установке и эксплуатации

Результаты поиска

Содержание GD16 - N

Отзывы:

Бренды по названию

Популярные бренды