W415-1454 / G / 04.01.19
EN
16
5.0 fi nishing
5.1
glass door removal and installation
A.
Remove the 4 screws off the appliance
(Fig. 5-1)
.
B.
Remove the glass front and place on a soft non-abrasive
surface.
C.
Reverse these steps to reinstall the glass front.
SCREW
A.
Remove the packaging materials holding the logs, grate and ember bed assembly to the appliance.
B.
Pinch the back of the assembly and lift it up from the appliance.
5.2
log, grate, and ember bed assembly removal
For Model NEFB29H:
A.
Remove the 4 screws securing the ember bed to the sides (and bottom, if applicable) of the appliance
(Fig. 5-2)
.
B.
Lift the log, grate and ember bed up from the appliance and remove.
For Model NEFB24H and NEFB27H:
Screw
Screw
Screw
(if applicable)
Screw
(if applicable)
NEFB27H Illustrated
!
WARNING
•
Power supply service must be completed prior to fi nishing to avoid reconstruction.
•
Heat vents and air openings cannot be covered under any circumstances.
!
WARNING
•
Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings, operation
of louvres or doors, or access for service. Observe all clearances when applying combustible materials.
•
Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy and
fragile so handle with care.
Fig. 5-1
Some models only have two screws.
note:
Fig. 5-2
