Outside of the tent, secure the tent to your vehicle:
A. Hook the bottom outside straps to any part of the wheel well and tighten (1 per side).
NOTE: Ensure the exhaust pipe is outside of the sleeve.
B. Tighten the bumper straps on either side of the vehicle sleeve.
Insert one end of the pole into the
grommet hole located in the corner of
the tent. Go to the opposite end of the
pole and gradually apply pressure to
the pole, forming an arch until you are
able to insert the pin into the grommet
hole. Repeat for the second pole.
Attach the pole clips.
4
5
From inside the tent,
unzip the door and mesh
that faces the vehicle
cargo area. Roll up the
mesh and door and secure
with T-straps.
Open the back hatch of
your vehicle.
Move the tent towards the
cargo area of your vehicle.
Slip the sleeve under the
bumper and over the
hatch and roof.
6
7
8
A. WITH A ROOF RACK
Remove the long strap (attached to the vehicle
sleeve) from the female clip. Attach the 2 short
straps around the roof rack and tighten. Repeat
on the opposite side.
10
9
