Insert one end of the pole into the pin located in the
corner of the tent. Go to the opposite end of the pole
and gradually apply pressure to the pole, forming an
arch until you are able to insert the pin into the pole
end. Repeat for the second pole.
4
From inside the tent, unzip the door and mesh that
faces the vehicle cargo area. Roll up the mesh and
door and secure with T-straps.
6
Attach the pole clips found on the tent to the poles.
5
Open the back hatch of your vehicle.
7
Move the tent towards the cargo area of your vehicle.
Slip the sleeve under the bumper and over the hatch
and roof.
8
Outside the tent, attach the following straps:
A.
Hook the bottom outside straps to any part of the
wheel well and tighten (1 per side).
Note: Ensure the exhaust pipe is outside of the
sleeve.
B.
Tighten the bumper straps on either side of the
vehicle sleeve.
9
A. WITH A ROOF RACK
Remove the long strap from female clip. Attach the 2
short straps around the roof rack and tighten. Repeat
on the opposite side.
10