5
KEYPAD FUNCTIONS AND CONTROLS
Pressing the key tests your telephone lines
(the sounder will start to pulse). If the line is
good, the pulsing will stop; if not, a steady
tone will sound. To initiate this test, hold
down Key [6] for about 2 seconds, until func-
tion beep sounds. Reset the sounder using
Key [9].
(
Note:
In MA1016-Series UL commercial
burglar alarm installations, Failure to Commu-
nicate is indicated by Zone No. __(Area 1),
__(Area 2). With the panel disarmed, the
STATUS LED will be flashing and the keypad
sounder will be pulsing. With the panel
armed, the ARMED LED will be flashing and
the zone number will be displayed).
Key [7]: WATCH MODE (MA1016 Series)
Simultaneously turns on all Day Zones.
The Watch Mode is disabled upon arming.
Note: (1) In all other models (except
MA854), the Watch Mode may have been
programmed to activate when bypassing a
group of zones simultaneously. See
PRO-
TECTING YOURSELF WHILE ON THE
PREMISES: Bypassing Interior Zones
. (2)
If turning on the Watch Mode just after dis-
arming, first hold down Key [9], then Key [7].
Holding down Key [7] within 10 seconds after
disarming will enable the Fault-Find Mode
(for installer's use only). (Arming the panel
will cancel the Fault-Find Mode.)
Key [8]: PROGRAM
Allows you to enter the Program Mode. In
this mode, you can program your personal-
ized User Codes, a Service Code (not in
MA854) and, in MA1016-Series panels, an
Access Code and a Manager's Code. (Refer
to
SELECTING AND PROGRAMMING
YOUR CODES
for more information). Hold
down Key [8] for about 2 seconds, until the
function beep sounds.
Key [9]: RESET
Resets any sounder indication, system
trouble indication (not in MA854), Day-Zone
indication, or may be programmed to reset
the Fire Zone. After an alarm occurs and the
system is disarmed, the numerical display will
still indicate which non-24-Hour Zone(s)
caused the alarm. Use Key [9] to clear the
display. The Reset Key is also used to by-
pass a Priority with Bypass Zone. To reset a
function, hold down Key [9] for about 2 sec-
onds, until the function beep sounds.
Key [*]: FUNCTION LIST
Displays Hold-Down Functions. Hold down
button for about 2 seconds, then Hold-Down
Functions will continue to scroll as long as
button is depressed.
Key [B]: ALARM HISTORY
This will display the last alarm condition.
History is not lost when the system is re-
armed; the previous alarm history will remain
in alarm memory until automatically reset by
a new alarm condition. To check alarm his-
tory, hold down Key [B] for about 2 seconds,
until the function beep sounds, then continue
to hold it down until all information has been
displayed.
Key [#]: ZONE LIST
Displays a directory of programmed zone
descriptions. Hold down Key [#] for about 2
seconds, until the function beep sounds.
Zone descriptions will continue to scroll as
long as the button is depressed.
Keys [F], [P] and [A]: PANIC BUTTONS
If enabled, momentarily pressing one of
these keys together with Key [#] will immedi-
ately activate a Panic Zone. Refer to
PRO-
TECTING YOURSELF WHILE ON THE
PREMISES: Emergency Buttons
.
