NAPCO 5831, Руководство оператора

Страница: 10 / 19

5
4. The interior finish or silicone gaskets may be
damaged by the following:
Diesel oil
JP-4 oil
MIL-0-5606
Hydraulic Fluids
Butyl Acetate
Carbon Tetrachloride
Ethylene Chloride
Gasoline
Kerosene
Xylene
Methyl Chloride
Stoddard Solvent
Toluene
Aromatic Chlorinated Solvent
5. Refer to the following chart as a guide to what
type of door gasket material is best suited for
your needs.
When turning vacuum pump off, immediately undo
the connection at the oven valve or the pump
intake.
1. Close the vacuum valve
2. Turn the pump off.
3. Immediately break the connection at the
pump or oven.
4. Leave connection open for one minute,
then reattach.
PERIODIC MAINTENANCE
1. If the oven fails to maintain set temperature,
it may indicate a problem with the Temp.
Control, or possibly a heating element failure.
Contact your local service representative.
2. Gaskets should be checked periodically for
hardening, shrinking, deterioration or other
signs of wear. It is advisable to keep several
gaskets available for use as replacements.
3. The oven is equipped with silicone door
gaskets, unless specified otherwise. Do not
use silicone door gaskets or vacuum grease
when evaporating solvents in the oven or
when using high analine point oils. BUNA-N
gaskets should be used in applications when
evaporating solvents or when using high
analine point oils.