NAPCO 51220166, Руководство оператора

Страница: 14 / 19

9
EFFECTIVE METHODS FOR CLEANING STAINLESS STEEL
Cleaning Agent * Method of Application** Effect on Finish
Routine Cleaning Soap, or ammonia, or
detergent and water. Sponge with cloth, then rinse
with clear water and wipe dry. Satisfactory for use on all
finishes.
Smears and Fingerprints Arcal 20, Lac-O-Nu, Lumin
Wash, O'Cedar Cream Polish,
Stainless Shine, or
Wind-O-Shine. Rub with cloth as directed on
the package. Satisfactory for use on all
finishes. Provides barrier film
to minimize prints.
Stubborn spots and stains,
baked-on splatter, and
other light discolorations Allchem Concentrated
Cleaner or Lusteel. Apply with damp sponge or
cloth. Satisfactory for use on all
finishes.
Samae, or Cameo Copper
Cleaner. Rub with damp cloth. Satisfactory for use on all
finishes if rubbing is light.
Cooper's Stainless Steel
Cleaner, or Revere Stainless
Steel Cleaner. Rub with damp sponge or
cloth. Use in direction of polish lines
on No. 4 (polished) finish. Use
light pressure on No. 2 (mill)
and Nos. 7 and 8 (polished)
finishes.
Liquid NuSteel. Rub with dry cloth. Use small
amount of cleaner. Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished )
finishes.
Paste NuSteel, DuBois Temp,
or Aerogroom. Rub with dry cloth using a
small amount of cleaner. Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Household cleansers, such as
Old Dutch, Lighthouse,
Sunbrite, Wyandotte, Bab-O,
Gold Dust, Sapolio, Bon Ami,
Ajax, Comet, Off, or Stainless
Steel Super Shine. Rub with a damp cloth. May
contain chlorine bleaches.
Rinse thoroughly after use. Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Grade F Italian pumice, Steel
Bright, Lumin Cleaner, Zud,
Restoro, Sta-Clean, or
Highlite. Rub with a damp cloth. Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
Penny-Brite or Copper-Brite. Rub with a dry cloth using a
small amount of cleaner. Use in direction of polish lines
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
Nos. 7 and 8 (polished)
finishes.
BuBois Stainless Steel Polish. No rubbing - just spray lightly
on dry surface and wipe off. Forms thin, hard satin-sheen
finish that resists grease
stains, water marks,
fingerprints, etc.
MAINTENANCE OF STAINLESS STEEL (CONT.)
The following chart is provided as a guide to cleaning the interior surface of your vacuum oven.