Decoder User Manual
2
2
Usage
The decoder shall be used with the NVMS together for decoding on the TV wall.
The default IP address: 192.168.0.210
The default name of the device: decoder.
The default user name: admin.
The default password: 123456.
①
Make sure the PC and decoder are connected to the LAN and the IP-Tool is installed in the PC
from the CD.
②
Double click the IP-Tool icon to run this software. Then the device can be searched; if the
device can’t be searched, please check whether the PC and the device are connected to the
network or not. Click the device to check its detail information as shown below:
③
Modify the IP address. Click the information of the decoder listed in the above table to show
the network information. Modify the IP address and gateway of the decoder and make sure its
network address is in the same local network segment as that of the computer. Please modify
the IP address of your device according to the practical situation.
④
Run the authentication server first and continuously in NVMS. Create devices, users, media
servers and TV Walls in Config Client and then start media transfer server and TV Wall Client
(Please refer to NVMS User Manual for details).
⑤
Double click the decoder in IP-Tool and the system will pop up the IE browser to connect to
the decoder. IE browser will automatically download the ActiveX control if you are the first
time to login. After downloading, a login window will pop up as shown below.
Содержание PX-1102TW
Страница 1: ...Decoder User Manual...
