DTW38FL, DTW12FL
6
Rev. 01/23/13
REPLACING THE HEAD KIT (CONT.)
Step 8:
Fasten the lid to the ratchet head with lid screws.
See Fig. 8
Test the functionality by making sure the driver turns and
the switch can pivot in both directions.
Fig. 8
BATTERY INSTALLATION
• Remove the battery cap.
• Insert two AA batteries (provided) matching the
-/+ polarities of the battery to the battery
compartment.
• Replace the battery cap and fasten it tightly
according to the above illustrations.
BEFORE USING THE WRENCH
Battery and Cover
+
+
-
-
SET UP
1. Power On/Clear
2. Unit/Setting
3. Memory (Stores up to 9 values)
4. Up/Down
1
3
4
2
• Press
to power on the digital torque wrench.
• If the wrench does not function normally, remove the
battery cover, then replace. This will reset the unit.
NOTE:
If an external force is being applied to the torque wrench
during power-on/reset or wake up period, an initial torque
will be shown in the display. Some or all the lights will
illuminate and the wrench will sound a continuous alarm
tone.
To clear the display and stop the alarm press the
button.
POWER ON AND RESETTING