• 4 •
6. OPERATING INSTRUCTIONS
6.1 Direct the lens away from your eyes before turning on the work light.
6.2 Press the power button once to turn on the light at high power.
6.3 Press the button again for low power.
6.4 While light is on, slide the barrel to focus the beam.
6.5 To turn off the light, press the power button.
6.6 Recharge the work light after use, and at least every 6 months.
V
7. MAINTENANCE INSTRUCTIONS
7.1 Before performing maintenance, disconnect the work light from your charger.
7.2 Use a dry cloth to wipe any dirt or oil from the charging cable and case.
7.3 Any servicing should be performed by qualified service personnel.
8. STORAGE INSTRUCTIONS
8.1 Store inside, in a cool, dry place.
8.2 Take care to avoid/prevent damage to the charging cable and unit. Failure to do
so could result in personal injury or property damage.
8.3 Charge the work light’s internal battery immediately after purchase, after every
use and every 6 months.
8.4 All batteries are affected by temperature. The ideal storage temperature is at
70°F. The internal battery will gradually self-discharge (lose power) over time,
especially in warm environments. Leaving the battery in a discharged state may
result in permanent battery damage. To ensure satisfactory performance and
avoid permanent damage, charge the internal battery every 6 months.
