Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and value (0.5A/250V)
fast blow for the 400mA range, 10A/250V fast blow for the
10A range).
6. Put the fuse door back in place. Insert the screw and tighten it
securely.
WARNING
: To avoid electric shock, do not operate your meter
until the fuse door is in place and fastened securely.
Technical Hotline:
888-227-1603
For any technical assistance or possible service issues,
please call the toll free number above, especially if you feel
the need to return your instrument. Please call us first and
let us help you!
WARRANTY INFORMATION
This product is warranted to be free from
manufacturer defects for ONE YEAR from date of
purchase, and carries a One Year “Repair/Return”
warranty (code 724). If this product fails during the
first 12 months due to faulty materials or
workmanship, it will be repaired or replaced free of
charge, at the discretion of the manufacturer.
NOTE: This one year warranty does not cover dead
batteries and blown fuses.
IMPORTANT REPAIR/RETURN INSTRUCTIONS
: DO
NOT RETURN PRODUCT TO STORE.
Users must call
and request Return Authorization # prior to sending any
product in for out-of-warranty repair by calling 888-227-
1603. Out of warranty repairs billable to the end user. For
warranty and service coverage after YEAR ONE please
call 888-227-1603.
REPAIRS:
MAIL TESTER FREIGHT PREPAID TO: NAPA
Meter Repairs, 139 Elizabeth Ln., Genoa City, WI 53128
17
18
