Napa BK 700-2602, Инструкция по эксплуатации

Страница: 1 / 13

¦¸
AUTOMOTIVE DIGITAL MULTIMETER
Model BK 700-2602
INSTRUCTION MANUAL
SAFETY INFORMATION
The following safety information must be observed to insure
maximum personal safety during the operation of this meter:

Do not use the meter if the meter or test leads look
damaged, or if you suspect that the meter is not operating
properly.
 Never ground yourself when taking electrical measurements.
Do not touch exposed metal pipes, outlets, fixtures, etc.,
which might be at ground potential. Keep your body isolated
from ground by using dry clothing, rubber shoes, rubber
mats, or any approved insulating material.
 Turn off power to the circuit under test before cutting,
unsoldering, or breaking the circuit. Small amounts of
current can be dangerous.
 Use caution when working above 60V dc or 30V ac rms.
Such voltages pose a shock hazard.
 When using the probes, keep your fingers behind the finger
guards on the probes.

Measuring voltages which exceed the limits of the
multimeter may damage the meter and expose the operator
to a shock hazard. Always recognize the meter voltage
limits as stated on the front of the meter.
17 18