4
Intended uSe
Your PROF Self-Levelling Cross-Line
Laser is intended for determining
and checking horizontal and vertical
lines. The measuring tool is suitable
exclusively for operation in enclosed
working sites.
general Safety InStructIonS
WarnIng!
Read all instructions. Failure to
follow all instructions listed below
may result in hazardous radiation
exposure, electric shock, fire and/or
serious injury.
WarnIng!
The following label/print samples
are placed on the product to inform
of the laser class for your
convenience and safety.
WarnIng! laSer radIatIon.
aVoId dIrect eye eXPoSure
DO NOT stare into the laser source.
Never aim light at another person or
object other than the workpiece.
The laser light can damage your
eyes.
Read all instructions. Failure to
follow all instructions listed below
may result in electric shock, fire
and/or serious injury.
Do not direct the laser beam at
persons or animals and do not stare
into the laser beam yourself.
This laser complies with class 2
according to IEC 60825-1: 2014. Do
not replace the laser diode with a
different type. If damaged, have the
laser repaired by an authorised
repair agent.
SPecIfIc Safety InStructIonS
WarnIng!
Working safely with the
cross-line laser is possible only
when the operating and safety
information are read completely and
the instructions contained therein
are strictly followed. Never make
warning labels on the product
unrecognizable.
Use of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation
exposure.
ALWAYS make sure that any
bystanders in the vicinity of use are
made aware of the dangers of
looking directly into the laser tool.
IEC/EN 60825-1
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M O R V I E W
D I R E C T LY W I T H
O P T I C A L I N S T R U M E N T S
C L A S S 2 L A S E R P R O D U C T
Max Output ≤1 mW @ 510 - 530 nm
