NaOClean DES-WA50 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 20

NaOClean DES-WA50 Скачать руководство пользователя страница 18

page

18

4. Inspection >

Cautions / Troubleshooting /

Replacement period & Block diagram

Block diagram

※ The life time (approx. 10,000 hours)

of the electrode may vary depending

on water quality.

Electrodes replacement period

Change pump oil

1. Please open the cover with screwdriver, and place the

Oil tray in front of the motor.

2. Please open the cover ①, ② and drain the oil.
3. Fill certain amount of kerosene into ② and clean up.
4. After draining the kerosene, please fasten the cover ① with screwdriver and fill the oil into ②,
and then close the cover.
5. Remove the

Oil tray and fasten the last cover with screwdriver.

- The level of the oil must be checked periodically.
- The most important is that the oil must be changed after the first 50 hours of work and successively every 100 hours.
- In any case we suggest change the oil at least once a year.
- Oil type : 15W-40 or equivalent motor oil.
- Oil capacity: 225ml ± 5ml

2

1

«
...
16
17
18
19
20
»

Содержание DES-WA50





















Отзывы:

Нет отзывов