•
Use only 1.5V alkaline batteries with this device. Other type of battery may damage the
unit.
•
Follow local ordinances and recycling instructions regarding disposal or recycling of the
device components, including batteries.
•
Only the authorized service personnel can repair this device.
1.3.2
Cautions
•
Autoclaving, ethylene oxide sterilizing, or immersing the Body Scale in liquid may cause
inaccurate measurements.
•
Excessive user movement may cause inaccurate readings
•
All NantLife devices are designed to be compliant with rules and regulations in locations
they are sold and are labeled as required.
•
Any changes or modifications to NantLife equipment, not expressly approved by
NantLife void the user’s authority to operate the device.
1.4
Before taking a Measurement
To ensure accuracy, readings should be taken without clothing and under consistent conditions of
hydration. If you do not undress, always remove your socks or stockings, and be sure the soles of your
feet are clean before stepping on the measuring platform.
Try to wait about three hours after rising, eating, or hard exercise before taking measurements. To
monitor progress, compare weight and body fat percentage taken under the same conditions over a
period of time.
Note : An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are
bent or you are in a sitting position. Stand straight.
1.4.1 Select the weight mode
Select the weight unit you want to use by using the switch on the back of the scale as shown in
the figure.
Draw figure
1.4.2 Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure
safe and accurate measurement (ideally bathroom tiles).
Draw Figure
If you are using the Body Scale on carpet, install the 4 carpet feet provided with the Body Scale.
Note : To avoid possible injury, do not step on the edge of the platform.
1.4.3 Automatic shutdown function
The automatic shutdown function shuts off the power automatically in the following cases:
•
After taking a measurement within 20 seconds
•
If the measurement is interrupted; the power will shut down automatically within 20 seconds.
•
If an extreme weight is put on the Body Scale
2.
Operating Instructions
2.1.
Know your NantLife Smart Body Scale
(goes with a drawing of the device numbered- circled numbers –VJ to do)
1.
“ON/OFF” button
2.
Weight Mode Switch
3.
Bluetooth application