10
5. The measurement is stored and sent automatically to your
virtual Health Diary. You can access your data by login in the
Nantlife portal or by using the NantLife Application on your smart
mobile devices (Bluetooth enabled phones and tablets only).
6. The monitor will automatically turn off 10 seconds after send-
ing the data through Bluetooth signal, or after 1 minute when it
cannot find a Bluetooth connection.
Notes: To STOP the inflation or measurement, press the button.
The monitor will stop inflating, start deflating and turn off.
2.8 Bluetooth Activation
First, set up your mobile phone or tablet to receive data by Blue-
tooth (see your smart mobile phone or tablet user guide). If your
phone is already activated, go to 2.9 to pair the device with your
phone or tablet.
2.9 Bluetooth Pairing
Before readings can be transmitted via your mobile phone,
tablet or via the HBox®, the NantLife Blood Pressure Monitor
needs to be paired to your device or to the NantLife HBox® hub.
(If NantLife has already prepared the pairing of the device, go
directly to 2.10 for “Data Transmission” instructions.
Pairing with SmartPhones and/or Tablets:
3 easy steps
Step 1: Press the button to turn on the Blood Pressure Meter.
The screen turns on. The device is activated.
Step 2: Start the NantLife Application and hit the “Scan” button
Step 3: When the blood pressure icon is highlighted on the
smartphone screen, select it to pair.
Caution: Your mobile phone must have wireless Bluetooth Low En-
ergy capability. While performing the measurements you must be
close to the monitor (max.10 meters [32 feet] away). You can find
more information on pairing at www.nantlife.com
Pairing with HBox®
: 3 easy steps
Step 1: Press the button to turn on the Blood Pressure Meter.
The screen turns on. The device is activated.
Step 2: Plug the HBox® in a wall electrical outlet.
The HBox LED green light turns on.
Step 3: Gently tap to pair the activated blood pressure meter to the
HBox®. The LED yellow light of the HBox will flash or a music will
play to confirm pairing.
2.10 Data Transmission
The measurement results saved in the blood pressure meter are
transmitted automatically to the Bluetooth® enabled smartphone
and/or the HBox®.
The models of transmission include Realtime Bluetooth® transmis-
sion and Non-Realtime Bluetooth® transmission. After each blood
pressure measurement, the reading is transmitted automatically.
The wireless sign flashes quickly on the blood pressure monitor
screen showing good transmission.
