Nantian Electronics PR9 ES, Руководство по обслуживанию

Страница: 20 / 112

PR9 Service Manual
Page 15 of 102
Fig. 2-2 Removing the Transportation Retainers
2.2.2 INSTALLING THE MACHINE
Position the machine for operation, making sure that it complies with the
information provided in section 2.1.
- Make sure that the voltage rating indicated on the electrical data plate
corresponds to the local mains.
Plug the power cord into the electrical wall outlet (make sure that the printer
has been turned off) and then power on the printer.
- Make sure that the printer powers on by checking the mechanical reset and the
lighting of the ON LED on the operating panel.
2.3 OFF-LINE TESTS
A print test can be run to make sure that the printer works correctly before actually
connecting it to the system.
2.3.1 STARTING AND STOPPING THE PRINT TEST
Proceed as follows to activate the print test:
Power on the printer, after initialization, it will enter the on-line operation
- Pressing down the "STATION 2" and "COMPRESS" keys simultaneously on
the console, the printer will enter the off-line operation.
- Pressing COMPRESS key until the LCD shows "MENU PRINTING", pressing
STOP key to accept.