Nanoxia Deep Silence 5, Инструкция по эксплуатации

Страница: 11 / 21

4.2 Conversion and removal of the HDD-cages
The Deep Silence 5 is equipped with four fully modular HDD-cages (3 x 3-bay, 1 x 2-bay). The
cages can be removed, swapped or repositioned almost at will.
Due to this unique variability, you can:
- Adjust the number of available HDD mounts
- Install extra-long graphic cards
- Optimize the air flow within the case
- Mount a water cooling system behind the front fans
In order to ensure an easy modification of the HDD-cages, we recommend that you remove
both side panels of the case first.
a) Remove the upper age (A) by pressing the
lever upwards, as shown in the picture.
b) Now pull the hard drive cage gently in the
opposite direction.
c) If you want to remove the middle cage as well, repeat steps a) and b) as stated above.
If you want to remove the middle cage and use only the upper cage, please note that the
upper cage (A) is not firmly anchored to the case. It can be pulled out of the case without
effort, if the central cage (B) is not installed.
A B
10