nanoskin EVERGREEN EG-1007, Инструкция по эксплуатации

Страница: 5 / 9

Adjustment of Liquid Adjusting Valve
/ Fixed Valve
3
Method of Liquid Adjusting Valve / Fixed Valve
Internal Liquid Tube
Fixed Valve screw allows to adjust the air flow. Once the
Air pressure is fixed, please tighten the fixed valve.
Liquid Adjusting Valve
The tighter the liquid adjusting valve screw,
the thinner and smaller the spray volume is;
the looser the liquid adjusting valve screw,
the thicker and larger the spray volume is
Fixed Valve
Liquid Adjusting Valve
Caution
During operation, please tighten the fixed valve firmly.
Failure to tight up the fixed valve might cause damages.
Installation of the Liquid Tube and Internal Liquid Tube
Attachment
(See Figure 1 below)
Internal Liquid Tube might bend during the attachment, please attach with care. Attach the liquid
tube on the cone with internal liquid tube directly. Pull it lightly to check whether it is properly
installed. (Note: DO NOT pull too hard)
Attach the Internal Liquid Tube and Liquid Tube Firmly.
Failure to attach properly might cause fluid leaking while in operation.
Detachment
(See Figure 2 below)
Press the joint with one hand, and pull out the liquid tube with the other hand .
Liquid Tube (on the cone)
Do Not pull the tubes too hard.
Detaching the tube without pressing the joint will cause serious damages to
the tube and socket.
Do Not bend or crush Internal Liquid Tube.
Attach liquid tube with internal liquid tube carefully.
Joint
Figure 2
Joint
Figure 1
Caution
Caution
Caution