9
Note:
The value of each field in the table is not the true value of the target information. The true value
of the target information needs to be calculated through the following relations:
-
Index
= IndexValue
//
Target ID = 1. According to Track information, NRA24
outputs only one target.
-
Rcs
= RcsValue*0.5 – 50
//
Factory test retention value, do not do output
-
Range
= (RangeHValue*256 + RangeLValue)*0.01
//
The original data unit of the
radar output is cm, and the unit of target distance after conversion is meters
-
RollCount = RollCountValue
//
counter
-
Check sum = Check Sum
//
check sum Verify whether there is an error in the data
transmission
The target reflection Radar-Cross Section (RCS), the target range (Range)can be obtained by
these calculations, to accurately detect the targets.
