Document # 700005-0000R
April 3, 2019
7
WIRELESS
ULTRA SYSTEM
OWNER’s Manual
Clear Soft Meters “Dailies” numbers
o
Pressing and holding the <
Soft Meters
> button then pressing the number <6>
button will clear the “DAILIES” but not the “GAME REPORT”.
Set Password on Soft Meters “Dailies”
o
Pressing and holding the <
Soft Meters
> button then turning the <key> ON then
OFF, and finally releasing the <
Soft Meters
> button. All the LEDs will turn off
and you will be prompted for a 4 digit password. choose your password by
pressing the buttons <
1
> through <
6
> in the order desired, the LED of each key
pressed will turn on once it has registered. The maximum password length is 8
digits. Once the desired password has been entered, press the <
Soft Meters
>
again to save the value.
Note: All instructions including the password itself will be printed. Also If no keys
are pressed within 15 seconds while entering the password, the operation will
timeout.
Clear Soft Meters “Dailies” Password
o
Pressing and holding the <
Soft Meters
> button then turning the <
key
> ON then
OFF, and then release the <
Soft Meters
> finally turning <
key
> ON then OFF a
second time, will clear and remove the password
Print Bookkeeping
o
Turning the <
key
> will print the “GAME REPORT” and “BOOKKEEPING”
information and then automatically clear both
2 Meters
The HOST Game Interface maintains 3 full sets of (non-volatile) electronic meters: Soft Meter,
Key Meter, and Central Meter. Each set is completely independent from each other. The Soft
meter and hard meter can be individually cleared at any time.
The Soft Meter “Dailies”
This meter is typically used by the “location operator”. To print this set of meters, press
the “Soft Meter” button. To clear the values back to zero, press the “Soft Meter” button
and button “6” simultaneously.
The Key Meter “Bookkeeping”
This meter is typically used by the “route operator”. To print the key meters, turn the key.
The key meter report will be printed immediately and will ALWAYS be cleared following
the report.
The Central Meter “Remote Access”
This meter can be accessed remotely. The accumulated data is accessed by a
customized application such as Nanoptix WINDSHIELD software.
