Spectification
1>Long press on"+" or "-" for more than 3 seconds, the date will progressively and rapidly increase or
decrease in the rate of 5 seconds.
2>When setting each of the mode, if there is none operation for 5 minutes, then it will return to waitting
state.
3> When setting each of the function, long press on " " for 3 seconds can cancel current setting and
enter to waitting state.(remark:When setting the system time, revised time date will be displayed when
return to waitting state.
4> During time function setting, long press on " +" " " , a beep sounds, it can cancle the curent time
function setting.
5> We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any residuce
from their surfaces.
2>Use " +" "- " button to adjust finishing time. (Refer to the instructions for setting the correct time of day.)
3>some time after the adjustment operation is completed, the day's time will appear on the screen and
the symbols "A" " "will light on the screen. While doing this, the oven will also start to operate.
3>At the completion of the set duration, the timer will stop the oven and give an dudible warning. Also, the
symbol" A" will begin to flash on the screen. After bringing the cooking function and oven temperature
button to "0" position. Long pressing any key for 3 second, it will stop the audible waring.
Full-automatic programming:
This function is used to cook after a certain period of time, with a certain duration. The food to be cooked
is put into the oven. The oven is adjusted to the desired cooking function. The oven temperature is adjusted
to the desired degree depending on the food to be cooked.
First:
Press " " button until you see " Dur " on the timer screen. Use " +" "- " button to adjust cooking
period for the food you wish to cook. Some time after the adjustment operation is completed, the day's
time will appear on the screen and the symbols "A" will begin to continuously light on the screen.
Second:
keep pressing on " " button until you see "End" on the timer screen. When you see "End" on
the timer screen, the symbol "A" and the day's time will begin to flash, with the addition of the set cooking
period. Adjust the finishing time for the food,by using the "+"and "-"keys, while the timer is in this position.
Some time after the adjustment operation is completed, the day's time will appear on the screen and the
symbol "A" will begin to continuously light on the screen.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking
period to the day's time.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time, and will stop at the set finishing time. The timer will give an audible warning and the symbol "A" will
begin to flash. After bringing the cooking function and oven temperature button to "0" position. Long
pressing any key for 3 second,it will stop the audible waring.
Please note:Once setting full-automatic mode, all the time can not be changed. Change time means cancle
automatice progamme and enter into corresponding mode. If you need to reset automatic mode, need to
stop setting the current mode, to set the automatice mode according to the above steps again.
2>Use " +" "- " button to adjust finishing time. (Refer to the instructions for setting the correct time of day.)
3>some time after the adjustment operation is completed, the day's time will appear on the screen and
the symbols "A" " "will light on the screen. While doing this, the oven will also start to operate.
3>At the completion of the set duration, the timer will stop the oven and give an dudible warning. Also, the
symbol" A" will begin to flash on the screen. After bringing the cooking function and oven temperature
button to "0" position. Long pressing any key for 3 second, it will stop the audible waring.
Full-automatic programming:
This function is used to cook after a certain period of time, with a certain duration. The food to be cooked
is put into the oven. The oven is adjusted to the desired cooking function. The oven temperature is adjusted
to the desired degree depending on the food to be cooked.
First:
Press " " button until you see " Dur " on the timer screen. Use " +" "- " button to adjust cooking
period for the food you wish to cook. Some time after the adjustment operation is completed, the day's
time will appear on the screen and the symbols "A" will begin to continuously light on the screen.
Second:
keep pressing on " " button until you see "End" on the timer screen. When you see "End" on
the timer screen, the symbol "A" and the day's time will begin to flash, with the addition of the set cooking
period. Adjust the finishing time for the food,by using the "+"and "-"keys, while the timer is in this position.
Some time after the adjustment operation is completed, the day's time will appear on the screen and the
symbol "A" will begin to continuously light on the screen.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking
period to the day's time.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time, and will stop at the set finishing time. The timer will give an audible warning and the symbol "A" will
begin to flash. After bringing the cooking function and oven temperature button to "0" position. Long
pressing any key for 3 second,it will stop the audible waring.
Please note:Once setting full-automatic mode, all the time can not be changed. Change time means cancle
automatice progamme and enter into corresponding mode. If you need to reset automatic mode, need to
stop setting the current mode, to set the automatice mode according to the above steps again.
6
