XCD Edge Motherboard
User Guide
XCD EDGE Motherboard Interfaces
D/N: XCDE458100, Revision B
11
3
XCD EDGE
Motherboard Interfaces
This section provides the required information for interfacing with the
XCD EDGE
Motherboard.
3.1
Functional Interface
Controlling an EDGE
Motor through the XCD EDGE
Motherboard
Operating Nanomotion motor requires a setup consisting of the following
components:
A Host PC, running the XCD Commander application, SW version 1.0.
This SW is developed especially for evaluation and development
purposes.
1. An XCD EDGE Motherboard: either the XCD EDGE Motherboard, P/N:
XCDE150100-XX or a user-customized motherboard, that meets the
inerface requirements, as specified in section
3.
2. The XCD EDGE
Controller Driver.
3. A single axis NM stage (or user-customized power stage) with moutned
EDGE
motor.
4. A 12Vdc power supply.
Serial
communication
Host PC
XCD Edge
Motherboard
XCD Edge
Controller Driver
Edge
Motor
Encoder
12Vdc Power
Supply
