NanoEnTek JuLi Stage, Руководство по установке

Страница: 3 / 4

3.
Connect the other end of the repeater cables to the USB cables of the control box.
The LEDs on the control box should be red. Cover the connected part of the cable
with protective plastic cover.
4.
Plug the white connecting cable into the control box using the end of the cable without the
ferrite core.
5.
Connect the other end of the connection cable to the JuLI™ Stage. Make sure that the
connection cable is tightly connected to the connection port. Then connect the power
cord.
6.
Turn on the JuLI™ Stage using the switch on the control box.
7.
Start the JuLI™ Stage control software and follow the warm-up guidelines.