BUDDI
TM
© 2015 NanoEnTek Inc.
7
Thoroughly read all instructions before attempting to operate this equip-
ment. Pay particular attention to all safety precautions. The following
guidelines must be observed during every phase of operation. Break-
ing these rules may be dangerous, illegal or affect performance of the
equipment and/or invalidate the equipment approval and/or warranty. In
order to avoid instrument damage or personal harm, read this manual
carefully and follow the instructions given.
NOTE
: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Always ensure that the power supply input voltage matches the volt-
age available in your location.
This machine is air-cooled so its surface becomes warm during op-
eration. When installing the equipment on the counter top always
leave a space of more than 10 cm (4 inches) around the instrument
in all directions.
Leave adequate distance between the back of the instrument and
the wall to allow the operation of the ‘on’ and ‘off’ power switch.
Do not insert metallic objects into the BUDDI
TM
as this could result
in an electrical shock, personal injury and equipment damage. Insert
only qualified and authorized devices supplied by NanoEnTek Inc.
Do not insert any foreign materials into the air vent or the speaker.
Always set the instrument to the ‘Power-off’ state before connecting
the power cord to the wall outlet.
When unplugging the power cord, be certain to power off the instru-
ment, then unplug the power cord.
Safety
Precautions
Introduction
•
•
•
•
•
•
20160901 BUDD �� ���.indd 7
2016-09-05 �� 2:22:17
