NANODRON E, Инструкция по эксплуатации

Страница: 16 / 52

16
1. Safety instructions
General instructions
- It must be verified that the device electrical nominal data (tension, frequency) reported
(refer to “Technical Data”) are corresponding to the local electrical supply.
- Make sure the device is connected to the functioning and properly earthed electrical outlet.
Otherwise there is electric shock hazard.
- Do not use any connecting cable other than the one provided with the device. In case of any
cable damage please contact our service center to exchange it for a new one. Damaged cable
can cause fire or electric shock hazard.
- Before any maintenance or repair works and in case of any malfunction or damage it is
required to turn the device off and unplug connecting cable from the electrical outlet.
Maintenance and repair works must NOT be carried out while device is in operation or
connected to the power supply line. Failure to follow these instructions may result in a fire
hazard, electric shock or other possible dangerous situation and will void the warranty.
Temperature conditions
Temperature of indoor air should be within the allowable limits:
-10 to +40˚С
.
Otherwise, the device can be damaged.
DO NOT:
- Install the device in premises exposed to risk of fire or explosion;
- Install the device on unstable or infirm surface;
- Install the device on or near radiator or heater;
- Build the device into furniture or other interior;
- Allow any liquids, metallic or other items get inside the device;
- Spill any liquids on the device, the power base or the power cable.
!