4
Wiring Diagram
Front view option:
NCP-MIR43 functions as a rear
view camera standard and also supports front view
application. For front view application, you can cut
the thin WHITE wire near the camera lead and restart
power to see the image reversed.
Grid-line option:
NCP-MIR43 comes with parking
grid-lines. To remove the grid-line application, you
can cut the thin GREEN wire near the camera lead
and restart power to show the removal of grid-lines
on your screen.
Camera Installation - Butterfly Mount
1.
Select a flat and centred location near the number plate lamp at the
rear of the vehicle to mount camera.
IMPORTANT:
When selecting this location it is highly recommended that the image transmitted by the camera show the rear bumper and area behind the vehicle.
Suggested location
to mount camera
2.
Attach tape to the bracket
of the camera, and drill
a small hole for the first
screw.
3.
Use a screw driver to fix
the first screw, but don’t
tighten it yet.
4.
Insert camera wire
through newly drilled
hole and mount securely
in place.
5.
Mark the position suitable
for the second screw and
drill a small hole for it.
6.
Fix the second screw and
tighten both screws.
