NanoCam Plus NCP-DVRHD2, Руководство пользователя

Страница: 12 / 20

2.7.5 G Sensor
The G Sensor defines the required force needed to trigger emergency recording. Once Emergency recording is triggered
the current recording will be saved and protected from being saved over by the normal loop recording. To set the required
sensitivity please follow the instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the Settings Menu.
3. Use the
<
and
>
Buttons to navigate the
Settings Menu and highlight the G Sensor setting and press
OK
to select.
4. Use the
<
and
>
Buttons to turn highlight your required sensitivity, then press
OK
to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.6 Volume
The Volume setting controls the cameras volume output. To adjust the cameras volume, please follow the instructions
below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the Settings Menu.
3. Use the
<
and
>
Buttons to navigate the
Settings Menu and highlight the Volume setting and press
OK
to select.
4. Use the
<
and
>
Buttons to turn highlight your required Volume level, then press
OK
to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.7 White Balance
The White Balance setting is used to optimise your Car DVR to produce the best footage for the surroundings. To adjust
the White Balance, please follow the instructions below.
1. Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the Settings Menu.
3. Use the
<
and
>
Buttons to navigate the
Settings Menu and highlight the White Balance setting and press
OK
to
select.
4. Use the
<
and
>
Buttons to turn highlight your required setting, then press
OK
to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
12