NANO NDL 010, Руководство пользователя

Страница: 12 / 16

User Guide - Heatless Desiccant Air Dryer
12 17-100-0100
5. Maintenance
Maintenance operations should only be carried out by authorised personnel.
5.1 Maintenance guidelines
•
Maintenance operations only to be conducted when the system has been shut
down and fully depressurised.
•
All connections must be undone with care, paying particular attention to the
areas that become pressurised.
•
Do not modify or adjust the control settings.
•
Only certified n-psl approved replacement parts to be used.
•
Always check all connections for leakage and secure seating.
•
Ensure all loose parts are removed or secured to the dryer before operation.
5.2 Daily checks
Visual and functional check of the dryer should be carried out daily:
•
Check the dryer for any external damage.
Assess and eliminate any defects found.
•
If the red service light appears, the dryer must be serviced.
Contact the service department and request a dryer service kit.
•
Remove any loose dust or dirt from the dryer; clean all surfaces that appear to
have attracted unwanted contaminants.
•
Check the dewpoint sensor display (where applicable). If the dew point is not
achieved the dewpoint reading on the display will alternate with “dewpoint alarm”
every 5 seconds. The no-volt alarm will also activate.
Contact the service department and request a product service.
5.3 Dryer service
A full product service is advised to take place every 2 years or 12,000 hours of
operation (whichever occurs first). A dryer specific service kit is available,
including all of the necessary replaceable components and servicing
equipment.