NANO 3 N2 Series, Руководство пользователя

Страница: 3 / 28

Page 3 17-110-0142
1. General Information
This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent
in writing from nano-purification solutions. It may not be distributed through the internet or computer bulletin
board systems without prior consent from nano-purification solutions.
1.1 Document Introduction
This manual provides factory prescribed procedures for the installation, operation and maintenance of a nano-
purification solutions Series 3 Nitrogen Generator. The procedures illustrated in this document are only to be
performed by authorized personnel. For further information regarding the procedures outlined in this document
contact nano-purification solutions before proceeding.
Read this document carefully before attempting to install or operate the generator . This document should be
permanently available at the generator installation site and be kept in an easily accessible place alongside the
product.
©2012 nano-purification solutions.
Series 3 Nitrogen Generator
Document number: 17-110-0142
Issue: 001
NOTES: highlight important sections of information where particular care and attention should
be paid.
CAUTIONS: indicate any situation or operation that may result in potential damage to
the product, injury to the user, or render the product unsafe.
Annotations:
1.2 Support
For North American Support please contact:
nano-purification solutions
11330 Vanstory Drive
Huntersville, NC 28078
USA
Telephone: (704) 897-2182
Fax: (704) 897-2183
Internet: www.n-psi.com
E-mail:
support@n-psi.com
Manufacturer’s Details
nano-porous solutions limited
Dukesway, Team Valley. Trading Estate,
Gateshead, Tyne and Wear,
United Kingdom, NE11 OPZ.
Telephone: +44 (0) 191 497 7700
Fax: +44 (0) 191 497 7709
Internet: www.n-psl.com
E-mail:
info@n-psl.com