NANO HUB ESPERO 100 LIFT, Руководство пользователя и по обслуживанию

Страница: 14 / 44

14
1. Connect the device to a
power supply. When the
device is powered (24
V/AC-DC) it reverts to the
stand-by mode and blue
LEDs will illuminate
“ON/OFF” button and side
segment
2. By pressing the “ON/OFF”
button once, the fans
switch on at minimum
speed, the side segment
blue backlight turns on.
Pressing a second time,
the device turns OFF
3. Fan Max Speed is
automatically regulated by
lift electric connection,
and type of setting on Dip
Switch selector. Below are
listed all the possible
combinations:
ON
Use the word “ON”
placed on Dip-Switch as
directional reference.
Switch 4/1 Switch 3/2
Position 4 (closed)
device will turn on at
fan max. speed for all
the time when lift
RELAY will be open,
when lift RELAY close,
device will turn off.
Position 3 (extra
time) with this switch
OFF, device will work
with extra time settings
(approximately 120
sec.) after lift RELAY
close.
Position 1 (open) fan
speed max speed will
be managed by lift
RELAY closing. When
lift RELAY opens, fan
speed will be turned to
min. speed.
Position 2 (normal
time) with this switch
ON, device will work
with default time
settings, as indicated in
the left column.