NANO HUB BORA 250, Руководство пользователя и по обслуживанию

Страница: 19 / 44

19
7 - TROUBLE SHOOTING
DEVICE DOES NOT TURN ON
▪
Verify that the device is correctly connected to the power supply
▪
Verify that there is no power failure or voltage drop in the area
▪
Verify that the remote-control functions properly
NO AIR COMES OUT FROM THE DEVICE
▪
Check that the appliance is turned on
▪
Check that the appliance air outlet grilles are free from obstructions
▪
Check that the air intake grilles of the appliance are free from obstructions
DEVICE IS NOISY
▪
Verify that the highest speed of the device is not selected
▪
Check that the maintenance indicator is not on. If so, it will be necessary to
clean the filter as it could obstruct the correct passage of air (see chapter 4 -
Maintenance section)
▪
Check that the air grilles are not blocked
DEVICE EMITS A BAD SMELL
▪
Check that the maintenance indicator is not on. If so, it will be necessary to clean
the filter (see chapter 4 - Maintenance section)
▪
Check that the air filter is clean
8 - STORAGE
This device is supplied in its box and in a cellophane bag. It is recommended to
open the packaging just before using the device. If it is necessary to store the
device whose packaging has already been opened, it is recommended to replace it
with a new one or to seal it, so that dust or moisture does not come into contact
with the device. In case of storage of the device even for a short period, make
sure that there are no sources of heat in the proximity, water and excessive
humidity. It is recommended to store the devices in a closed and sheltered
environment.