Nannio Hero3, Руководство пользователя, Страница: 6 / 17

Connect parent unit and baby unit
When the parent unit and baby unit are connected, the connection
light on the parent unit becomes green.
When the baby unit is turned off, the parent unit will show
“out-of-range image”. If you want both products work properly,
please make sure that the baby unit is turned on.
Push the on/off switch on the baby
unit to the ON position.
Press the on/off button on the parent
unit to turn on the unit.
When the parent unit is turned on, it starts to search for the baby
unit.
Note: When the baby unit is turned on, the
power indicator always lights up in green
Automatic connection
Note: If no connection has been established, the connection light turns red,
the parent unit beeps three short beeps every 20 seconds and the
out-of-range image appears on the monitor