Nanni N16.1000 CR3 Скачать руководство пользователя страница 88

Страница: 88 / 119

S08

MAINTENANCE

5. Close the bleed nipple on the fuel filter. Tightening

torque 9 Nm.
6. Attach a clear plastic hose to the bleed nipple on the

high pressure pump (3). Let the plastic hose drop into

a container that holds at least 5 litres (1.3 US gallons).

7. Open the bleed nipple on the high pressure pump and

pump the hand pump until fuel without bubbles comes

out. It will take around 150 pump strokes.
8. Close the bleed nipple (3 in the illustration) on the high

pressure pump. Tightening torque 9 Nm. Screw down

the hand pump handle.
9. Start the engine. The engine should be easy to start.

MISCELLANEOUS

CHECKING THE DRIVE BELT

IMPORTANT !

1. Check the drive belt thoroughly, particularly at the

idler rollers.

2. Check the drive belt for cracks. Renew the drive belt if

deep cracks have formed.

Note:

Small and shallow cracks are normal and form after

only a few hours of operation. They do not mean that the

drive belt needs to be renewed. If there are many deep

cracks, or if parts of the drive belt have started to come

off, the drive belt must then be renewed.

The belt is worn down to the cord. The drive belt must be renewed.

Содержание N16.1000 CR3
























































































































Результаты поиска

Содержание N16.1000 CR3

Отзывы:

Похожие инструкции для N16.1000 CR3

Бренды по названию

Популярные бренды

Nanni N16.1000 CR3, Руководство оператора

Результаты поиска

Содержание N16.1000 CR3

Отзывы:

Похожие инструкции для N16.1000 CR3

Бренды по названию

Популярные бренды