S-57
03-M Series, WSM
DIESEL ENGINE
(4) Timing Gears, Camshaft and Fuel Camshaft
Injection Pump
1. Remove the stop solenoid (1) and hi-idling body (2).
2. Remove the engine stop lever (3) and stop solenoid guide (5).
3. Remove the fuel injection pump assembly (4).
IMPORTANT
Q
• Before removing the injection pump assembly (4), be sure to
remove the stop solenoid (1), hi-idling body (2), engine stop
lever (3) and stop solenoid guide (5).
(When reassembling)
• Before attaching the stop solenoid (1), hi-idling body (2) and stop
solenoid guide (5), install the injection pump first into position.
• Replace the hi-idling body gasket (6) with a new one.
• Before fitting the stop lever (3) to the gear case, install the stop
solenoid guide (5) first into position. Then attach the stop lever
and use it to see if it functions well.
• Before fitting the idling limiter in place, attach the stop solenoid
guide (5) and the engine stop lever (3) in their respective
positions.
• When installing the stop solenoid (1), be careful to keep the O-
ring in place.
• Be sure to insert the push rod of the stop solenoid into the hole
at the center of the solenoid guide (5).
W1023686
Tightening torque
Hi-idling body
44.1 to 49.0 N·m
4.5 to 5.0 kgf·m
32.5 to 36.3 ft-lbs
(1) Stop Solenoid
(2) Hi-idling Body
(3) Stop Lever
(4) Injection Pump Assembly
(5) Stop Solenoid Guide
(6) Hi-idling Body Gasket
KiSC issued 08, 2012 A