4
、
2.4G
、
Bluetooth and LUMENRADIO Remote Control
Evoke 1200B is able to be remotely controlled by 2.4G remote controller, or by NANLINK APP
via the transmitter box or via Bluetooth directly.
Note:
1
）
2.4G remote controller and transmitter box are sold separately.
2
）
The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Please set fixture to V2.0 while
using WS-RC-C1 or WS-RC-C2 remote controller. Please set fixture to V1.0 while using other
remote controllers.
Evoke 1200B has built-in lumenradio module, enabling it to receive CRMX wireless DMX signals.
5
、
Safety Precautions
1
）
Please open the package to check for damage caused in transit, if damaged please do not use
and contact place of purchase or manufacturer as soon as possible.
2
）
Please do not use a power cord with damaged insulation, do not unplug too hard or drag the
power cord directly.
3
）
Make sure that the power supply voltage used matches the voltage designated by the light
before installation.
4
）
Please turn the light off when it is not in use or before cleaning.
5
）
Please keep the light safely stored and away from children.
6
、
Notice
1
）
Please take off the COB protective cap before using.
2
）
Please do not look directly at the emitter when the light is on .
3
）
Please wait 10 seconds to turn off the light fixture after any parameter setting in order to save
it for future use.
4
）
Please do not place any objects on the light emitter or allow liquid to flow inside the fixture or
the emitter.
5)
Please
do
not
place
the
light
fixure
near
the
flammable
substances
like
alcohol
or
gasoline.
6)
Please
wipe
off
debris
or
dirt
by
using
a
cloth
with
clean
water
or
neutral
cleanser
when
cleaning
the
light.
7)
The
fixture
should
be
used
in
dry
and
ventilated
place
and
avoid
being
used
in
damp,
dusty
or
overheated
environment,
also
make
sure
the
fan
and
the
vents
are
not
blocked
or
obstructed.
8)
Any
attempt
to
repair
the
fixture
by
yourself
will
void
warranty,
disasembling
and
repair
can
only
be
allowed
when
trained
professionals
are
involved
under
strict
protocal
regulated
in
this
manual.
9
）
For
optimal
cooling
of
the
fixture,
the
vents
should
not
be
covered
when
using,
or
might
result
in
damaging
the
equipment.
The
temperature
on
the
fixture
surface
is
high
when
using
for
a
long
time,
please
caution
to
prevent
burns
and
scalds.
10)BLE and SRD simultaneous launch is not supported.SRD is only received.
