11
·The connection between the light fixture and DMX512, light fixture and light fixture should use five core shielded
cable and make sure its diameter is not less than 0.3mm.XLR plug/socket and the wire should be connected as
the picture aboved.
NC
NC
NC
NC
2. DMX Remote Control
①
Connect the light fixture to the DMX512 console with a connection cable in the following way:
DMX IN
GND 1
DATA-2
DATA+3
DMX OUT
1 GND
2 DATA-
3 DATA+
·Pin1, Pin2, Pin3 for connecting DMX singal, Pin4, Pin5 is connectionless.
▲Note: When connect with socket, make sure the internal pin not be in contact with the inner case.The fixture can
match the the DMX512 (1990) control signal.
·Plug of five-core and three-core XLR plug/socket conversion.
The fixture comes with five-core XLR plug. lf you use the three-core XLR plug, kindly follow below instruction.
Pin 1:GND(SCREEN)
Pin 2:Signal(-)
Pin 3:)
Pin 4:N/C
Pin 5:N/C
Pin 1:GND(SCREEN)
Pin 2:Signal(-)
Pin 3:)
Five Pin
Three Pin