Detail Description
1. Barndoor: For adjusting the illuminated area.
2. Dimmer knob: For adjusting the brightness.
3. Angle fixing knob: For fixing the fixture on the light stand and adjusting the illumination direction of fixture.
4. Sony V-Mount battery holder: For installing the Sony V-mount battery, or holding the power adapter when install
the adapter holder. NOTE: If using Anton/Panasonic battery, make sure change to corresponding battery holder.
5. Battery lock button: For installing or removing the battery.
6. Yoke: For connecting the fixture to the light stand and adjusting the tilt and pan of fixture.
7. Digital display: For showing the fixture's brightness, color temperature and lighting code.
8. ADDR button: For adjusting the adress of the fixture.
9. Power switch:Turn on/off the fixture.
10. DC power socket: DC power input interface.
11. Filter
：
Soft diffuser, enhanced soft diffuser, blue filter. Without diffuser, it creates spotlight effect and suitable for
shooting at a relatively long distance. With diffuser or enhanced soft diffuser, it creates the corresponding soft
effect. With blue filter, the color temperature changes to 7500K.
Usage
1. Please install the fixture on the light stand and adjust the fixture according to desired position, then open the barndoor.
2. Make sure the fixture is in the "off" position and connect the power adapter or battery.
Install the attaching plug of fixture to the DC power socket.
①
NOTE: Make sure the power, voltage and frequency are consistent with the provided power adapter.
When using battery, make sure to turn off the fixture, then plug in the battery.
②
3. When turn on the fixture, the display will light up normally, that means the power is active.
4. Adjust the fixture's brightness via "Dimmer knob" to meet the shooting needs.
3
