www.naneos.ch
15 | 17
Maintenance
Cleaning the corona wire of the charger
Turn the device off before cleaning the corona wire! During operation, the
corona wire is at high voltage and you will receive a slight shock if you
touch it.
Open the two screws marked in figure 7 with a philips screw driver.
Remove the charger hatch. Check condition of sealing o-ring. Contact
naneos for a replacement if it is brittle or has visible cracks. Take an artist
’s
brush and carefully slide it along the thin HV wire. Too much force can
break the corona wire!
Figure 8: Charger hatch closed (left) and opened (right)
Disposal
The device contains a lithium ion battery and must be disposed of
accordingly. Under no circumstances should it be disposed of with
domestic refuse, nor crushed or burnt. Naneos offers to take products
back for correct disposal.
