10
Manual
DEEP
6. Storage
After the end of the working season, parts and assemblies should be reviewed. IN
in the event of damage or significant wear, replace the relevant parts
for new ones. Clean the dirt and rust spots of paint coatings and make up
Anticorrosive paint and then topcoat. Work surfaces
Protect the subsoiler tines and tubular shaft against corrosion.
WARNING! Store the subsoiler on an even, level surface, preferably in
a covered place and protected against access by unauthorized persons and
animals.
7. Subsoiler transport
WARNING! Special care must be taken when transporting the subsoiler. It
is forbidden to drive on public roads without appropriate additional
marking warning.
Before traveling on a public road, the subsoiler frame should be fastened at the ends
portable warning and lighting devices and a vehicle warning sign
slow moving (handle in the center of the tubular shaft frame).
Portable light and warning device should consist of two boards with stripes
white and red fitted:
- at the front - in white position lights, round white reflector,
- at the rear - in red, brake, direction and position lights
red triangular reflex.
The sign plate (the so-called Triangle) should be mounted in the holder in the middle of the
shaft frame
tube.
During transport, the subsoiler should be raised to a minimum height
ground clearance under the machine was min. 25 cm
Transport speed must not exceed:
- 20 km / h - on asphalt roads
- 5 km / h - on roads with a different surface
While driving, drive the tractor as close to the right edge of the road as possible. special
caution should be exercised when overtaking and passing other users
expensive.
